Boeing studies pilotless planes as it ponders next jetliner

SEATTLE: Boeing is looking ahead to a brave new world where jetliners fly without pilots and aims to test some of the technology next year, the world's biggest plane maker said in a briefing ahead of the Paris Airshow.
The idea may seem far-fetched but with self-flying drones available for less than $1,000, "the basic building blocks of the technology clearly are available," said Mike Sinnett, Boeing's vice president of product development.
Jetliners can already take off, cruise and land using their onboard flight computers and the number of pilots on a standard passenger plane has dropped to two from three over the years.
Sinnett, a pilot himself, plans to test the technology in a cockpit simulator this summer and "fly on an airplane next year some artificial intelligence that makes decisions that pilots would make", he said.
Self-flying aircraft would need to meet the safety standards of air travel, which had its safest year in 2016, according to the Aviation Safety Network. They would also need to convince regulators who don't yet know how to certify such planes.
"I have no idea how we're going to do that," Sinnett said. "But we're studying it right now and we're developing those algorithms."
Airlines are among those backing the idea, in part to deal with a projected need for 1.5 million pilots over the next 20 years as global demand for air travel continues to grow.
But a self-flying plane would need to be able land safely as Captain Chesley Sullenberger did in the "Miracle on the Hudson," Sinnett said. "If it can't, then we can't go there."
A US Airways plane hit a flock of geese shortly after taking off from New York in 2009 knocking out its engines but Sullenberger managed to glide the Airbus A320 to a safe landing on the Hudson River, saving all 150 passengers on board.
Boeing is also streamlining its aircraft production systems at its largest factory, trying to cut costs to compete with rival Airbus and chip away at the near-$30 billion deficit created by its 787 Dreamliner.
Dozens of complex robots are replacing humans for such mundane tasks as drilling and riveting, and Boeing is reordering some of its assembly steps to speed up the process.
The savings, part of a long-term cost-cutting drive at the world's biggest plane maker that also includes substantial staff reductions, comes as Boeing has spent heavily to develop new aircraft models.
It poured $1 billion into erecting a 27-acre factory to make carbon composite wings for its forthcoming 777X widebody jet.
It scaled the factory to produce 100 planes a year. But with only 306 firm orders for the 777X on its books, and the production rate falling, Boeing is challenging workers to find more efficient ways to do the work so it can avoid purchasing some of the planned machinery.
"Frankly, we would like to not to have to buy all of the equipment that we are currently sized for," said Eric Lindblad, vice president of the 777X program, during a recent factory tour. "It's just saving money on capital."
Behind him, only two of six bays built to hold carbon fiber placement machines had been outfitted with all equipment.
Boeing also has set up a temporary low-rate assembly line for initial production (LRIP) of the 777X so it can test processes before hitting the acceleration pedal.

Reducing risk

The "LRIP" strategy comes in part from painful lessons on the 787 line, where early aircraft that came out of the factory needed heavy reworking.
This time, "we are actually testing the primary elements of that new production capability" on the 777, a plane Boeing already knows how to make, said Jason Clark, vice president of 777 and 777X operations.
Final assembly of the 777X begins next year, with testing in 2019 and first delivery in 2020. Lindblad said it might be delivered a quarter early, if customers want, but not in 2019.
On the 787 line, where wings, fuselage and other major pieces are shipped from suppliers and simply assembled at Boeing, the savings options are fewer.
But teams are still taking out costs. They have slashed production time by more than two-thirds in four years through such changes as organizing kits so mechanics have all parts on hand and putting interiors into planes earlier on the assembly line, said Bob Manelski, director of 787 business operations.
Boeing builds the 787 in Everett, Washington, and North Charleston, South Carolina. That allows it to try out new techniques on one line at a time. A year ago, it started noting a "champion time" for fastest production and analyzing how that was done.
The savings are crucial to paying back about $27 billion in deferred 787 production costs racked up by the first few hundred 787s.
Boeing's goal is to build the largest 787 version, the 787-10, in the same amount of time as the two smaller versions — and for the same cost as the 787-9.
It has no choice but to continue getting lean, Manelski said. "We have to price the airplane more and more aggressively every time we got to the market."